A spot color is one premixed ink printed from its own plate. A process color is built on press from overlapping halftone dots of cyan, magenta, yellow, and black (CMYK). Most packaging uses both: CMYK for images, and spot inks for brand colors, white, and varnish. In flexo, the choice decides how many plates a job needs, which anilox each color runs on, and how repeatable the color is on a rerun.
Spot and process color at a glance
| Spot color | Process color (CMYK) | |
|---|---|---|
| How the color is made | One ink, mixed to a formula before the run | Tints of up to four inks printed in register |
| Plates | One per spot ink | Four, however many colors the design uses |
| Typical use | Brand colors, logos, fine type, white, metallics | Photos, vignettes, illustrations |
| Main risk | Plate count and press decks | Registration, dot gain, and how far the build sits from the target |
Every spot color is a plate
Adobe's guide to color separations puts the rule plainly: a design with twenty different CMYK colors still separates into four plates, while CMYK plus two spot colors needs six. Each spot also needs its own press deck. Muraplast's flexo design notes describe a design with fourteen Pantone spots sent to an 8-color press, and remind designers that white on clear film and each varnish take a deck too.
For a trade shop, plate count is the quote. Every separation is imaged, processed, and billed by area, so a spot added late in approval changes the price. Check the separations in the plate area calculator before quoting, not after.
Why flexo prints one color on two plates
Solids and fine screens want different ink films. Muraplast notes that the anilox for CMYK screens carries 3 to 4 times less ink than a spot-color anilox, which is why 100% black text defined in CMYK can print dark gray. When one spot ink has to print both a heavy solid and a fine vignette, the solid and the screened area are usually split onto separate plates and run from two decks with different ink films.
Esko's flexo application guide gives the same choice: separate linework and process work into two plates, or run a higher-volume anilox and give up highlight quality. It also recommends hard tapes for plates that carry only solids and linework, such as spot or white plates, and medium tapes for plates that mix solids and screens.
So "how many colors?" and "how many plates?" are different questions. A five-color job can need six plates.
Converting a spot color to a process build
Converting spots to CMYK saves plates and lets jobs with different brand colors share a form. It has limits. An FTA study puts the share of the Pantone book that can be reproduced in a GRACoL CMYK gamut at about 40%.
Where the CMYK values come from also matters. In an FTA article on prepress color consistency, SGS reports that Pantone Bridge book values may suit offset but are often poor for flexo, because ink sets, substrates, and print conditions vary. It builds spots from the press's own ICC profile, with two limits:
- A highlight floor. Dots of 1% or 2% are less stable on press than 3% to 5%. SGS uses 5% as a rule.
- No more than three inks per build. In its tests, limiting builds to three colors improved the match and made it more stable on press.
Color families need extra care. A set of cool grays used in a vignette can turn into a four-color build with inks stepping in partway through, which SGS calls a significant issue on press. Forcing the family to black only costs some accuracy in the light tones but keeps the vignette smooth.
If many spots need converting, a fixed seven-ink set covers far more of the book than CMYK. The extended color gamut note covers what that takes.
When a spot color should stay a spot
- Fine type and reverses. Cetis Flex's artwork guidelines allow 3 pt positive text and 5 pt reversed text, but ask for 8 pt when text is reversed out of a multicolor build, because every extra plate adds registration risk.
- Logos and vector text. Muraplast asks for these to be defined as Pantone or HKS colors, not CMYK.
- Inks CMYK cannot build. Opaque white, metallics, and fluorescents.
- Tight brand tolerances. If the best build cannot meet the brand owner's Delta E limit, the spot stays.
Preflight: one name, one plate
Many surprise plates come from naming, not design. CreativePro gives the classic case: a swatch named "PMS286" and placed art using "Pantone 286 C" are treated as two spot colors. Adobe's Ink Manager can alias the duplicate so both output to one plate. Automated preflight should flag these before imaging. Check for:
- Duplicate or misspelled spot names that would image as separate plates.
- Spots meant to print as process builds, and the reverse. Cetis asks customers to clearly identify spot inks apart from colors made of process inks.
- Technical spots, such as the dieline, white, and varnish, on their own named layers. See the dieline note.
- Spot gradients that use one ink and a minimum dot of at least 2%, as Cetis specifies for flexo.
- Spot tints that overlap. Adobe recommends a different screen angle for each interacting spot color; the AM and FM screening note covers flexo angle sets.
What to keep on the job record
Record each separation by type: process, spot, or technical (white, varnish, dieline). For each spot, keep the reference and library edition, whether it is split into solid and screen plates, and the anilox each plate runs on. For each conversion, keep the build, the profile it came from, the predicted ΔE, and who approved it.
Then reconcile the separation count with the quote. When a rerun arrives with one more plate than the original, that record shows whether the artwork changed or a duplicate spot slipped through, before the extra plate reaches the plate-area invoice.
Common questions
What is the difference between spot color and process color?
A spot color is one premixed ink printed from its own plate, used for brand colors, logos, fine type, white, and metallics. Process color builds colors from halftone dots of cyan, magenta, yellow, and black on four plates, however many colors the design uses. Adding spots adds plates and press decks; process builds depend on registration and the press profile.
Is a Pantone color a spot color?
Usually. Pantone colors are most often specified as premixed spot inks. A Pantone color can also be converted to a CMYK build, but in flexo the build should come from the press's own ICC profile. An FTA article reports that Pantone Bridge book values may suit offset but are often poor for flexo.
Can every spot color be printed in CMYK?
No. An FTA study puts the share of the Pantone book that can be reproduced in a GRACoL CMYK gamut at about 40%. Extended gamut ink sets such as CMYKOGV reach more, and colors outside the press gamut stay as spot inks.
Why does a flexo job have more plates than ink colors?
Solids and fine screens of the same ink need different ink films, so they are often split onto separate plates run with different aniloxes. White and varnish also take plates and decks. Duplicate spot names in the artwork, such as PMS286 and Pantone 286 C, can add an unwanted plate if preflight misses them.