Field note · Flexo prepress

What is a dieline? A flexo prepress guide

What a dieline is, the cut, bleed, and safety lines it holds, how to set up the dieline layer, how label dies close on the cylinder repeat, and which die data belongs on the job record.

Plate area · jobs · customers · AR — one system of record
Flexoworks
  • flexo
  • dieline
  • die-cutting
  • labels
  • packaging
  • prepress

A dieline is the vector drawing that shows where a printed label, carton, or pouch will be cut, creased, perforated, or left unprinted. In flexo it never prints. It tells the designer where the art goes, tells prepress where to place it, and tells the die maker what to build. The die number and its layout are part of the job spec, so they belong on the job record.

What a dieline file contains

Line or area What it marks Typical spec
Cut (trim) line Where the die cuts the label or blank Must match the production die exactly
Bleed line How far background art runs past the cut 1/16 in for labels; 1/8 in for cartons
Safety line Where text and logos must stay inside 1/16 in for labels; 1/8 in for cartons
Crease, score, perforation Folds and tear lines Cartons and some labels; one named spot color each
Non-print areas Glue flaps, seal areas, varnish-free zones Set by the converter's template

The label figures come from flexo label converters KDV Label and TemPac. The carton figures come from Wynalda's print-ready file guide. The FTA's FIRST design guide says a final dieline must come with the art for every die-cut job, and the template should also show print direction, varnish areas, seal areas, and the inside view.

How to set up the dieline layer

Converter file guides agree on the same rules:

  • Put the dieline on its own top layer, named "Dieline".
  • Stroke it in a 100% spot color named "Dieline" or "Die", in a color the design does not use.
  • Set the stroke to overprint so it knocks nothing out of the art below.
  • Keep it vector. Do not scale it, change its line weight, or flatten it into the art.
  • Build the artwork at 100% size to the die that will run in production.

A dieline converted to a process color, or flattened into a background, is a preflight failure. It can image onto a plate. Automated preflight should check that the dieline separation exists, is a spot color, and is excluded from plate output.

Label dielines come from the die, not the design

On a narrow-web label job, the converter usually owns a library of rotary or flexible magnetic dies. The FTA lists what a die maker needs for a flexible die order: label height and width, cylinder repeat, cavities across and around, gaps across and around, corner radius, cut type (kiss cut, thru cut, perforation), and the face and liner material.

Those numbers have to close on the cylinder. One converter's published die list has a 0.5 x 1 in label, 4 across and 8 around, with a 0.2188 in gap around, on a 78-tooth cylinder. At 1/8 in circular pitch, 78 teeth give a 9.75 in repeat, and 8 x (1 + 0.2188) = 9.75 in. The repeat length calculator and the cylinder sizes note cover the same math.

When a brand sends art built to a generic template, prepress has to refit it to the die that will actually run. Catch that at intake, before the proof.

Dielines and plate distortion

The dieline is drawn at finished size, because the die cuts at finished size. Plate distortion is applied to the printing separations at plate output, so the printed image stretches back to the die once the plate wraps the cylinder. Nobody should pre-distort the art or the dieline. Doing it twice is one of the four common distortion mistakes.

Carton dielines and CAD files

Folding-carton dielines usually start in structural CAD. The FIRST guide lists DXF, DDES2, IGES, and PDF as formats design and prepress software can import. In CF2, the format ArtiosCAD reads, line type 1 is a cut, 2 is a crease or score, and 3 is a perforation, according to AutomatePrint's dieline file docs.

Print-to-cut tolerance depends on the press and the stock; FIRST says die position tolerance is usually smaller on thin board than on thick stock. TemPac lists a typical die register tolerance of 1/16 in for labels, which is why the bleed and safety lines are that wide.

What to keep on the job record

Record the die number and who owns it, the label or blank size, cavities and gaps across and around, corner radius, cylinder teeth and repeat, cut type, the bleed and safety used, and the dieline file version with its approval date. The die layout also drives the step-and-repeat, which sets the plate area a trade shop bills for. A rerun that pulls the same die record gets the same layout, the same plates, and the same plate cost.

Common questions

What is a dieline in printing?

A dieline is a vector drawing that shows where a printed label, carton, or pouch is cut, creased, perforated, or left unprinted. It sits on its own layer in a named spot color, set to overprint, and does not print. Designers build art to it, prepress positions the job with it, and the die maker builds the cutting die from it.

Does the dieline print on a flexo job?

No. The dieline is a non-printing spot color on its own layer, set to overprint, and prepress excludes that separation from plate output. If the dieline is converted to a process color or flattened into the art, it can image onto a plate, so preflight should check for it.

How much bleed does a label dieline need?

Flexo label converters such as KDV Label and TemPac ask for 1/16 inch of bleed outside the die line and a 1/16 inch safety zone inside it, which matches a typical die register tolerance of 1/16 inch. Folding-carton printers often ask for 1/8 inch. Always confirm with the converter that owns the die.

What file format should a dieline be in?

For artwork, a layered vector PDF with the dieline as a named spot color is the usual handoff. Structural CAD dielines for cartons are often exchanged as DXF, CF2, DDES2, IGES, or PDF. In CF2, line type 1 is a cut, 2 is a crease, and 3 is a perforation.

Built for flexo trade shops

Keep production context with the job.

See how Flexoworks connects customers, prepress, plate production, delivery, and plate-area billing.