Rich black is 100% black ink with some cyan, magenta, or yellow printed underneath it, so a large black area looks deeper and more opaque than black ink alone. In flexo it is a trade-off. Every extra ink adds coverage the substrate has to dry, another plate that has to stay in register, and sometimes a plate the job did not otherwise need. Most flexo printers want rich black only on large solids, a simpler build than offset uses, and plain 100% black (100K) everywhere else.
Why black ink alone looks gray
A single black ink is not fully opaque. Adobe's overprinting guide notes that 100% process black can let underlying colors show through and recommends a rich black for large black areas and large black type, with the exact percentages set by the printer. On FOGRA51 offset reference data, as tabulated by printartworkspecs.com, 100K measures about L* 16, a 60/50/40/100 rich black about L* 13.1, and 400% registration black only slightly darker at L* 12.7. Most of the darkness comes from the black ink. The underlay adds a little depth and a lot of ink.
Rich black builds that flexo printers publish
| Source | Process | Large-area black | Ink limit |
|---|---|---|---|
| Graphic Packaging International | Complex graphics flexo | 2C recommended: 100K/40C or 100K/50K | 280% |
| Graphic Packaging International | Simple graphics flexo and gravure | 100K only | 280% |
| DWS Printing | Flexo | 30C 100K (60/40/40/100 for offset) | 320% max density, all processes |
| Packrite | Corrugated and folding carton | 40C 35M 20Y 100K | 280% |
| iPB Printing | Flexible packaging | 100C 100M 100Y 100K | Set by its own profiles |
The spread is the point. GPI also lists a four-color 100K/40C/20M/20Y build but strongly suggests two-color builds, because four-color blacks "may have unfavorable results even when printed within tolerances." iPB asks for a full 400% black on film. Neither is wrong for its own press. A rich black is a property of one print condition, so a recipe copied from an offset printer's guide is a guess.
Stay under the ink limit
Total area coverage (TAC) is the sum of all ink percentages at one point. The rich black budget is simple: the printer's limit minus 100 for the black. At GPI's 280%, cyan, magenta, and yellow can add at most 180 points, so the common offset build of 60/40/40/100 (240%) fits, and 60/50/50/100 (260%) still fits but leaves less room for shadows in an image placed under it. Esko's PackEdge manual sets a default TAC limit of 270% and says the real value should come from the printer. Images separated with the printer's profile respect the limit. Hand-built swatches, drop shadows stacked over black, and RGB black converted to CMYK do not, which is why TAC belongs in preflight.
Keep small type and fine lines 100K
Rich black prints from several plates, and every plate moves a little. ViaFlex gives ±0.010 in print-to-print register for labels. That is 0.25 mm, wider than the 0.2 mm minimum line in iPB's spec. A four-color hairline can shift by its own width and show a colored fringe. The FTA's FIRST 4.0 design guide says text should print in one color or a two-color process build, with a third color only as type gets larger. iPB says not to build black text and lines from CMYK at all. Barcodes stay one ink too (see barcode verification).
Small black should also overprint the background instead of knocking out a letter-shaped hole. InDesign overprints its [Black] swatch at 100% by default, but Adobe notes that tints and other blacks are not covered. Illustrator has no [Black] swatch, so overprint is set in the Attributes panel or with Edit > Edit Colors > Overprint Black. A rich black swatch knocks out unless someone sets it.
Hold the underlay back from the edges
When a rich black panel meets white, or white type is reversed out of it, a register shift lets the cyan or magenta peek out. Adobe's trapping guide calls the fix a keep-away: the black stays at full size and the other inks are held back from its edge. Esko's Automation Engine Enrich Black task builds the underlay automatically, typically 80% cyan or a neutral 60C 40M 40Y, with a choke distance that keeps it inside the black. FIRST 4.0 asks for the lighter color to be choked back one row of dots, which at 150 lpi is 1/150 in, about 0.0067 in. GPI's hold-back for complex flexo is 0.006 in. For reversed type, FIRST prefers a single dark holding line twice the registration tolerance. The trapping note covers trap width in more detail.
Preflight checks
- Text and lines under the printer's size threshold that use more than one ink.
- Areas over the TAC limit, using Acrobat Output Preview or the Esko viewer's TAC preview.
- The Registration swatch used in live art. It prints on every plate, as the registration marks note explains.
- Rich black solids set to overprint, or small 100K text set to knock out.
- Rich black areas with no hold-back where they meet white or reversed type.
- RGB black that converted into a four-color build.
What to keep on the job record
Record the approved black recipe for each customer and print condition: the build, the TAC limit, the hold-back or choke distance, which elements stay 100K, the overprint rules, and the minimum size for multi-ink type. A 2C rich black on an otherwise black-only design also adds a cyan plate, which changes plate count and plate cost. Measure the solid with a densitometer or spectro against an agreed Delta E target, and a rerun gets the same black, the same plates, and the same quote.
Common questions
What is the CMYK value for rich black?
There is no single value. Offset printers often use 60C 40M 40Y 100K. Flexo printers usually prefer simpler builds: Graphic Packaging International recommends two-color blacks such as 100K/40C for complex flexo, and DWS Printing uses 30C 100K for flexo. Ask the printer for its recipe and total ink limit before building the file.
Should small text be rich black?
No. Small text, thin rules, and barcodes should be 100% black only, set to overprint the background. Rich black prints from several plates, and a normal flexo register shift of about 0.010 inch can leave colored fringes on every letter. The FTA's FIRST guide says text should print in one color or a two-color build.
What is the difference between rich black and registration black?
Rich black is a deliberate build of 100% black plus a measured underlay of cyan, magenta, or yellow that stays within the printer's ink limit. Registration black is a swatch that prints 100% on every separation, including spot plates. It is meant only for registration and printer's marks and should never be used in artwork.
What is the total ink limit for flexo printing?
It depends on the printer, substrate, and separation profile. Graphic Packaging International and Packrite both specify 280% for flexo packaging, and Esko PackEdge defaults to 270%. Some flexible packaging printers allow more for large black solids. Use the limit in the printer's profile or spec.